Labelmate UCAT-3-STANDARD Series Unwinder
Labelmate UCAT-3-STANDARD Series Unwinder
UCAT-3 Powered Unwinders provide a convenient way to manage your supply roll of labels and also eliminate stress on your printer by feeding labels to the printer. These Powered Unwinders also allow you to use larger supply rolls thereby minimizing your per unit label cost. Additionally, the supply roll doesn’t have to be refreshed as often thus saving time and adding convenience.
Detailed Technical Specifications
These specifications apply to every model in the series:
Model-Specific Information:
UCAT-3-STANDARD:
- Max Media Width (in): 6 (152-mm)
- Dimensions-HWD (in): 14 x 17 x 17 (356 x 432 x 432-mm)
- Weight (lbs): 26 (11.8-kg)
UCAT-3-W10:
- Max Media Width (in): 10 (254-mm)
- Dimensions-HWD (in): 14 x 17 x 19 (356 x 432 x 482-mm)
- Weight (lbs): 28 (12.7-kg)
Available Options
-
FLANGE, CAT, OUT (Optional Outer Guide Flange)
-
HTO-CAT (High-Torque Option)
-
LTO-CAT (Low-Torque Option)
-
FOOTSWITCH
1. HTO-CAT increases Max Torque to 228 in-oz, Max RPM to 485, 304 ips (7,721-mm), and Power Out to 19VDC 80W.
2. LTO-CAT decreases Torque Range to 172 – 35 in-oz.
Available Part Numbers
| Model | Part Number |
|---|---|
| UCAT-3-STANDARD | 80-237-0016 |
| UCAT-3-W10 | 80-237-0017 |
Conclusion
The UCAT-3-STANDARD Series Unwinder is available from Century Systems in the configurations listed above. Full specifications, options and warranty terms are given in the manufacturer’s datasheet below.