Labelmate UCAT-1-CHUCK Series Unwinder
Labelmate UCAT-1-CHUCK Series Unwinder
The UCAT-1 Series Non-Powered Unwinders provide a convenient way to manage your supply roll of labels with a small amount of tension control. These Non-Powered Unwinders allow you to use larger supply rolls thereby minimizing your per unit label cost. The supply roll also doesn’t have to be refreshed as often thus saving time and adding convenience.
Detailed Technical Specifications
These specifications apply to every model in the series:
Core Diameter (in): 3 (76-mm)
Max Media Width (in): 6 – 10 (152 – 254-mm)
Max Speed (ips): N/A
Min Speed (ips): N/A
Max Torque (in-oz): N/A
Max RPM: N/A
Number of Flanges: 1
Power Specifications: N/A
Warranty: 5 year limited warranty
Model-Specific Information:
UCAT-1:
- Max Roll Diameter (in): 12 (305-mm)
- Max Roll Weight (lbs): 20 (9-kg)
- Dimensions-HWD (in): 14 x 12 x 17 (355 x 305 x 432-mm)
- Weight (lbs): 28 – 30 (12.7 – 13.6-kg)
UCAT-1-R16:
- Max Roll Diameter (in): 16 (406-mm)
- Max Roll Weight (lbs): 32 (14.5-kg)
- Dimensions-HWD (in): 19 x 16 x 17 (482 x 406 x 432-mm)
- Weight (lbs): 30 – 32 (13.6-kg – 14.5-kg)
Available Options
-
FLANGE, OUT, QC-12 (Outer Guide Flange) FLANGE, OUT, QC-16 (Outer Guide Flange)
-
ADAPT-326 (6″ Core Adaptor) ADAPT-326 (6″ Core Adaptor)
1. Depends on whether you order the CHUCK, CHUCK-220, or CHUCK-10 model
2. The UCAT-1 is Non-Motorized, Non-Powered
Available Part Numbers
| Model | Part Number |
|---|---|
| UCAT-1-CHUCK | 80-237-0003 |
| UCAT-1-CHUCK-10 | 80-237-0004 |
| UCAT-1-CHUCK-220 | 80-237-0005 |
Conclusion
The UCAT-1-CHUCK Series Unwinder is available from Century Systems in the configurations listed above. Full specifications, options and warranty terms are given in the manufacturer’s datasheet below.