Labelmate AUTOPRINT-300 Print Solution
Labelmate AUTOPRINT-300 Print Solution
AUTOPRINT-300 ® Print Mechanisms are a combination of LABELMATE USA’s well-known Reel-to-Reel Counting units with the Markoprint X1JET print head. These units can print an entire roll of labels in less than 5 minutes with a resolution of 300 DPI. The maximum print height is 0.5″ (12.7-mm). AUTOPRINT-300 ® is the ideal machine for adding variable data to pre-printed labels at low cost and high speed. AUTOPRINT-300 ®
Detailed Technical Specifications
These specifications apply to every model in the series:
Max Media Width (in): 5 (130-mm)
Min Media Width (in): 0.5 (13-mm)
Max/Min Label Length (in): N/A
Max Roll Weight (lbs): 15 (7-kg)
Max Roll Diameter (in): 11.8 (300-mm)
Core Diameter (in): 3 (76-mm)
Max Speed (ips): 50 (1,300-mm)
Min Speed (ips): 0.125 (3-mm)
Resolution (dpi): 300
Max Print Height (in): 0.5 (12.7-mm)
Max Print Length (in): 40 (1000-mm)
Dimensions-HWD (in): 13 x 32.5 x 19 (330 x 825 x 482mm)
Weight (lbs): 40 (18-kg)
Power Specifications: 100-240VAC in, 24VDC 100W out
Model-Specific Information:
AUTOPRINT-300 ®:
- Label Type: Opaque
- Liner Type: Opaque
AUTOPRINT-300-U ®:
- Label Type: Opaque & Transparent
- Liner Type: Opaque & Transparent
Available Options
-
Available Options Replacement Ink Cartridges may be purchased directly from HP.
Available Part Numbers
| Model | Part Number |
|---|---|
| AUTOPRINT-300 | 80-196-0007 |
| AUTOPRINT-300-U | 80-196-0008 |
Conclusion
The AUTOPRINT-300 Print Solution is available from Century Systems in the configurations listed above. Full specifications, options and warranty terms are given in the manufacturer’s datasheet below.