Labelmate TWIN-MATRIX Matrix Removal Systems
Labelmate TWIN-MATRIX Matrix Removal Systems
Matrix Removal Systems enable full-bleed printing and waste-matrix removal in-line, directly as the labels are printed. The TWIN-MATRIX is ideal for in-line rewinding and matrix removal of full-bleed, die-cut colour-printed labels: two gearless motors can be set to wind in opposite directions at the same time, so the finished label roll and the waste matrix are taken up together, and a sensor arm starts and stops the unit with the printer.
Detailed Technical Specifications
These specifications apply to every model in the series:
Model-Specific Information:
TWIN-MATRIX-6:
- Max. Media Width: 6.5″ (165-mm)
- Core-Chucks: Two TC-C76-170 Quick-Locking Core-Chucks
TWIN-MATRIX-8:
- Max. Media Width: 8.5″ (216-mm)
- Core-Chucks: Two TC-C76-220 Quick-Locking Core-Chucks
TWIN-MATRIX-10:
- Max. Media Width: 10.5″ (266-mm)
- Core-Chucks: Two TC-C76-270 Quick-Locking Core-Chucks
Widths above are maximum media (liner) width, as given on Labelmate’s product drawings and product pages. Labelmate’s printed catalog lists a maximum label width of 6″, 8″ and 10″ for the three models respectively.
Available Part Numbers
| Model | Part Number | Configuration |
|---|---|---|
| TWIN-MATRIX-6 | 80-271-0003 | Left side of printer |
| TWIN-MATRIX-6 | 80-271-0004 | Right side of printer |
| TWIN-MATRIX-8 | 80-271-0005 | Left side of printer |
| TWIN-MATRIX-8 | 80-271-0006 | Right side of printer |
| TWIN-MATRIX-10 | 80-271-0007 | Left side of printer |
| TWIN-MATRIX-10 | 80-271-0008 | Right side of printer |
Left- or right-side orientation is specified at the time of order.
Conclusion
The TWIN-MATRIX Matrix Removal Systems are available from Century Systems in the three widths and both orientations listed above. Labelmate publishes no separate datasheet for this line; the dimensioned product drawings below carry the full specification for each model.
TWIN-MATRIX-6 Product Drawing and Specifications