Labelmate CAT-3SA-STANDARD Series Rewinder
Labelmate CAT-3SA-STANDARD Series Rewinder
The economical CAT-3SA-STANDARD Rewinder Series utilizes Fin-Style Core Holders for 3″ diameter cores, and also affords the ability to rewind corelessly. These Rewinders provide an alternative to the CAT-3SA-CHUCK Series, and are ideal for use in-line with a printer because they feature a special Sensor Arm that automatically mirrors the start/stop action of the printer to prevent excessive tension on the label web.
Detailed Technical Specifications
These specifications apply to every model in the series:
Model-Specific Information:
CAT-3SA-STANDARD:
- Max Media Width (in): 6 (152-mm)
- Dimensions-HWD (in): 14 x 17 x 17 (356 x 432 x 432-mm)
- Weight (lbs): 26 (11.8-kg)
CAT-3SA-W10:
- Max Media Width (in): 10 (254-mm)
- Dimensions-HWD (in): 14 x 17 x 19 (356 x 432 x 482-mm)
- Weight (lbs): 28 (12.7-kg)
Available Options
-
HTO-CAT (High-Torque Option) HTO-CAT (High-Torque Option)
-
Available Options LTO-CAT (Low-Torque Option) LTO-CAT (Low-Torque Option)
-
FOOTSWITCH FOOTSWITCH
1. HTO-CAT increases Max Torque to 228 in-oz, Max RPM to 485, 304 ips (7,721-mm), and Power Out to 19VDC 80W.
2. LTO-CAT decreases Torque Range to 172 – 35 in-oz.
Available Part Numbers
| Model | Part Number |
|---|---|
| CAT-3SA-STANDARD | 80-203-0033 |
| CAT-3SA-W10 | 80-203-0034 |
Conclusion
The CAT-3SA-STANDARD Series Rewinder is available from Century Systems in the configurations listed above. Full specifications, options and warranty terms are given in the manufacturer’s datasheet below.
Labelmate CAT-3SA-STANDARD Series Rewinder Product Datasheet