LABELMATE MINI CAT 10A & MC11 LABEL REWINDER AND UNWINDER

 

The popular MINI-CAT Label Rewinders are the world’s lowest-price Label Rewinders. They are capable of rewinding label rolls up to 4½ -inches wide, up to 8-inches in diameter at speeds up to 10-ips (inches per second). The MINI-CATs can also be used as Label Unwinders.

 


Both MINI-CATs use LABELMATE’s proprietary Constant Adjustable Torque™ (“CAT”) technology to achieve impressive, reliable performance at an unprecedented low price. A special motor, designed specifically for the MINI-CATs, offers bi-directional operation and trouble-free performance.  A switch conveniently controls the amount of rewind force. No awkward tensioning arms, troublesome belts, or clutches are used and no speed adjustments are required. Your MINI-CAT automatically adjusts to any printer speed up to 10-ips and even allows label back-feeding automatically if your printer requires it.

The MINI-CAT-10A (MC-10A) has a 3-inch diameter core holder. You an also use the included “coreless rewind” feature to rewind directly on-shaft.

MC-10A: Rewind directly “on-shaft” without a label core, or you can use the included 3-inch core holder!

The MINI-CAT-11 (MC-11) includes a precision-crafted Adjustable Core Holder that adjusts in seconds to accept any core diameter from 1-inch to 4-inches (25- to 102-mm). The MC-11 will also do coreless rewinding.

Both MINI-CATs use LABELMATE’s proprietary Constant Adjustable Torque™ (“CAT”) technology to achieve impressive, reliable performance at an unprecedented low price.  A special motor, designed specifically for the MINI-CATs, offers bi-directional operation and trouble-free performance.  A switch conveniently controls the amount of rewind force. No awkward tensioning arms, troublesome belts, or clutches are used and no speed adjustments are required. Your MINI-CAT automatically adjusts to any printer speed up to 10-ips and even allows label back-feeding automatically if your printer requires it.

Both MINI-CATs have an inner label flange to keep the edge of the label web aligned as the labels are being rewound. Also available is an optional Adjustable Paper Guide (APG-1) that mounts directly to the MC-10A or MC-11 base plate and guides the outer edge of the labels. New for the MC-10A is an optional plastic Outer Flange (MC-10 Flange). See photos below right.

Rugged steel construction allows your MINI-CAT to simply be set in place near your label printer.  Special anti-slip feet prevent the unit from moving.  Put a LABELMATE MINI-CAT to work for you today and enjoy a new dimension in label rewinding & unwinding convenience and reliability.

MC-10 & MC-11 SPECIFICATIONS:
Label Width: Up to 4.5-inches (114+ mm).  Maximum Label Roll Weight: 8.5 lbs. (3.9 kg).
Label Roll Diameter: Up to 8-inches (203+ mm).
Core Diameter: MC-10A: 3-inch or coreless.
MC-11: Use any cardboard core from 1- to 4-inches (25 to 102mm) in diameter.
Speed:  Up to 10-ips (25+ cm/sec).  Switch adjustable rewind force. No speed adjustments are required.  Start/Stop: Convenient ON-OFF switch.  Direction:  Bi-directional.
Power Requirements: 120vac 60Hz. 20 va. UL / CSA Listed Power Supply.
Size: HWD 9 x 6 x 11 in. (229 x 152 x 279 mm). Weight: 13 lbs. (5.9 kg).
Optional: Adjustable Paper Guide (APG-1) guides the outer edge of the label web for MC-10A or MC-11. New for the MC-10A is an optional plastic Outer Flange (MC-10 Flange).

MINI-CAT-10A w/ Warranty:  3-Year Parts and Labor Limited Warranty, the longest in the industry!                    Optional Flange

(One [1] year Limited Warranty on included Power Supply Module.)

Order a LABELMATE MINI-CAT Rewinder for new low-cost convenience today!

Thousands are already in daily use around the world. 220-240vac 50Hz units are available at the same price.

Similar Posts