• Roll Diameter: up to 11.81″
  • Speed: 120 rpm
  • Label Width: up to 5″
  • Adjustable Core Holder

Download Technical Information

The AD2111-S2 label rewinder can handle labels up to 5” wide and rewind rolls with diameter up to 11.81” onto an adjustable core holder from 1.81” up to 4.64”. It is possible to add an optional support for heavy rolls.

The AD2111-S2 label rewinder is equipped with an external auto-switching 100/240VAC – 2.5A at 24V power supply and an electronic circuit controls the functions.

When the roll of labels runs out, the rewinder stops and sounds an acoustic signal.

The rotation, which is adjustable to clockwise or counterclockwise, allows to the AD2111-S2 to rewind labels face in or face out.

A tension arm adjusts the speed of rotation. When it is down, the rewinder turns at full speed, whereas when the tension arm is up, the rewinder is idle and blocks the motor’s rotation when the printer stops.


Similar Posts